What is the tablet de-duster

The Tablet De-duster is a equipment used in the pharmaceutical industry. Its primary aim is to remove dust and tiny particles from the surface of tablets during production. In the manufacturing process, tablets may attract some dust that, if not removed, could impair both the quality of the tablets and the safety of patients who take them. Hence, the presence of the Tablet De-duster is of utmost importance

What is the working principle

The Tablet De-duster typically operates by using high-frequency vibrations to shake off the dust from the surface of the tablets during the movement process. Then, a vacuum cleaner removes the dislodged dust.

What is the main application

The Tablet De-duster can be used with different models of tablet presses, metal detectors, and vacuum cleaners. This machine is extensively used in pharmaceuticals industries, food industries, chemicals industries, Nutraceutical industries and electronics industries.

What is the main parts and total structure

It contain the cover,sealing ring,sieve net,electrical parts,up&down column

What is the the popular models

1.Downhill tablet de-duster: Using vibration to move the tablet from top to bottom,small size suitable for low capacity production. Max speed:55000tablet per hour.

2.Uphill tablet de-duster:the tablet will move from bottom to top,the dusty can drop during tablet moving.Long dusting path for tablets, automatic flip-flop polishing, high screening efficiency. It is the best choise model.

3.Horizontal type tablet de-duster:using motor to move the tablet on horizontal level. Big size tablet inlet, so tabelt will not be jam together.

How to Choose the Right Tablet Deduster Model

Tablet size

Fillitechs have several model for different tablet size.For big size tablet,you can choose horizontal type de-duster,as the inlet size is bigger.

Capacity Requirements

If you will use tablet de-duster connect with tablet press, then you need to match the capacity with tablet press machine capacity.

The height of the outlet and inlet

If you want to connect the tablet de-duster to tablet press machine and metal detector,the height of inlet should be match the height of outlet of tablet press.And the height of outlet should be match the height of inlet of metal detector or tablet container.

Budget

You also need to consider the landing cost from China to your country. As there are also delivery cost,custom cost, tax,etc.

Room space

Layout drawing is also very important, then you can know whether there is enough space to installation.

Vertical type or horizontal type comparisoin

Veritical type tablet de-duster with long dedusting distance,such as 750 model is 7.5m,the inlet can adjust at 360°. The height is adjustable,it is easy to connect with tablet press machine and metal detector at the same time.

Horizontal type tablet de-duster with less dedusting distance,but size is small. You donot need to pay too much money.

The common trouble shooting of tablet de-duster machine

1. No vibration: check the power supply,wire connection and control switch.
2. Noise high:Check the each fastening part again. Or check the cover shape of de-duster.
3. No respond when adjust the speed:replace the vibrating piece or the controllor
4. The feeding speed cannot be satisfied and there is no abnormality:amplitude of the vibration plate exceeds the maximum range of the sensor. By adjusting the angle of the amplitude sensor to reduce the sensitivity of the amplitude detection, the maximum range of the sensor can be indirectly increased to increase the feeding speed of the vibration plate

The common maintenance of tablet de-duster machine

1. Check the fastening condition of outer parts
2. Check if the power supply is reliable or not
3. No load running should not less than 10 minutes
4. Inside part cleaning: screen net, powder collecting plate, powder suck pipe and so on.
5. Check if the installation of material inlet and outlet has deflection or not, the wheels are loose or not

The Ultimate FAQ when you want to buy tablet de-duster from China.

1. Q:Any Vacuum system is required for dust / powder collection?                 
   A:Yes, we need to connect with a vacuum cleaner
2. Q:Where the powder or dust will collect?  A:at the bottom of the machine
3. Q:what is the material of all contact parts
   A: all material contact part is SS316L.
4. Q:How long it will take if we make payment?
   A:We can arrange delivery within 3days,as we have many parts and half prodcuts in stock
5. Q:Does machine with trolley or wheel?
   A:Yes it is a movable machine
6. Q:Is there any temperature need to follow when install the machine?
   A:normal room temperature is ok.
7. Q:Does machne have saftey features?
   A:Yes,there is a cover on the running parts.
8. Q: what is the material of wheels ?
   A:Material of wheels are made of rubber with lock,meet GMP
9. Q:How about Training for operation and maintenance?
   A:As it is small and easy operation machine, we can provide video and online support
10. Q:Is there any difficult for delivery and custom clearance?
    A:We can provide door to door service to save time for you.
11. Q:Any certificate about this machine?
    A:We have followed EU standard and ISO certificate
12. Q:What is the powder supply and connection type?
    A:It depend on your requirement,such 220v 50hz or 110v, 60hz;US standard plug,UK standard plug,EU standard plug
13. Q:Do you have one machine with de-duster and metal detector functions? A :Yes, we have a combine machine with these two functions see the photos.